BraceBolt Features – Continued

Patented “Sprag Locking Mechanism”

BraceBolt use the patented “Sprag Locking Mechanism” with inbuilt crushable zone for increasing pull down forces.

Four Ribbed Precision Machined Expansion Sleeve

Four Ribbed Precision Machined Expansion Sleeve: for a postive engagement with the surrounding concrete.

Patented “Expansion Sleeve Locking Mechanism”

BraceBolt uses the Patented “Expansion Sleeve Locking Mechanism”, the key to obtaining “Greater Sheer Cone Strength” 62kN Ultimate Load. It also incorporates a High Grade Steel Cone Nut that produces the high radial forces which all add up to a rated anchoring system that closely matches brace capacity.

Page 2 of 2
« 1 2

  • OH&S Notes

    Before installation, the following conditions must be met:

    Refer to bracing plan on site and bracing requirements and a minimum concrete strength of 20MPa must be achieved.

    Anchors spacing to have a minimum distance of 250mm all around and a minimum edge distance 250mm

    Use safety equipment ­ eye protection, ear protection and face mask.

  • 14mm Hex Drive
    Tested to AS3850-2003
    Four Ribbed Expansion Sleeve
    Complies with RJB Industries SBS
  • Flanged Safety Bolt

    • Grade 8.8 Flanged Bolt
    • Domed flange head
    • 14mm Hex Drive for tamper resistance
    • Full M20 x 2.5 thread
    • Gal Plated
    Flanged Saftey Bolt

Copyright © 2010. All Rights Reserved.